Upgrade your graphics card is one of the most important things that you can do as a computer builder. One of the highlights of PC gaming is a modularity, as soon as your aging video card starts slowing down, you can replace it with one of the best graphics cards, upgrade your rig significantly.
Also said, there are a lot of things to go before upgrading your graphics card to your rig. That is, you would like to know how to safely remove a graphics card, when you have learned how to uninstall the graphics card driver, you are ready for the new, in which you are slotting. We are going to all that you need to know below the page.
Equipment and requirements
- A desktop pc
- A new graphics card
- A Philips #2 Spoke
- A suitable power supply unit (PSU)
- An internet connection
Quick phase to upgrade graphics card
- Uninstall your current graphics card driver From device manager
- turn off your PC And Unplay it From wall outlet
- Unplug your old graphics card PCIE Power ConnectorPCIE X16 London, and carefully remove GPU from the slot
- Plug your new graphics card to your computer’s PCIE X16 PortLock the latch, and then plug Pcie connectors
- New graphics card screw down To bracket
- Install the driver of your new graphics card From appropriate website/source
Upgrade a graphics card: step-by-step guide
1. Uninstall your current graphics card drivers
Before you upgrade your graphics card, you will need to remove current drivers so that they do not make any problem with your new GPU.
The easiest way to do this is device ManagerFind ‘display adapters’ From the drop-down list, and then to right-click ‘Uninstall the device’, Which will make things clear.
2. Remove your old graphics card
(Image: © Future)
Uninstall with old drivers, Turn off your computer Either from the start menu or with the power button (if necessary). With the closure of the computer, disconnect all cables in the back (as well as top/front if necessary).
Remove the side panel of your PC caseAnd then carefully Unplug pcie connectors From GPU. If it is an AMD or Intel graphics card, it can have one or two PCI 8-pin connectors; An Nvidia GPU may have a 16-pin (or 12-pin for the RTX 30 series) connector, which may require adapters of four PCIE 8-PIN connectors to adjust.
Using a Philips #1 screwdriver, Opening graphics card Behind the case from the rear PCI Mount, place one hand on the GPU to stop the SAG, and then Pick it from PCIE X16 Port With two hands, distributing weight equally. Set it aside and get ready for the next GPU.
3. Check your PSU’s power connector
(Image: © Future / John Lofler)
Depending on the TDP (and connector) of your new graphics card, you may need to run an additional pcie power connector (or two) from your PSU.
If you are upgrading to midrange or high-end one with entry-level card, you may need to upgrade your PSU. You have no doubt, research has been done on the TDP of your new GPU before investing, so you should meet the power requirements, provided you run the right amount of power connectors from brick to video cards.
4. Install your new graphics card
Keep yourself on the ground by touching the metal part of your computer case, and then Plug your new graphics card to your motherboard’s PCIE X16 slotEnsuring that you have proper withdrawal without blocking any M.2 port, entangled on cables, knocks in any intake fans, etc.
Once the new graphics card is secured, place one hand on it to prevent it from relaxing it on the bracket, and use your other hand Screw GPU in rear bracketOnce its weight is supported, use another screw (if applied) to keep the graphics card. If your model has come with an anti-igege bracket (such as triple-slot GPU), be sure to use it.
If it is an Intel or AMD GPU, Plug one to three pcie power connectors directly into the graphics cardfor new Plug NVIDIA card, 16-pin (or 12-pin) adapter And then insert power connectors to the other end of the adapter; It can be up to two or four connectors, it depends on whether you have a choice of RTX 5070 or some high-ends such as RTX 5080 or RTX 5090.
5. Install your new graphics card driver
(Image: © Nvidia)
Your new graphics card is safely installed and your PC is operated back, you are ready to install the latest drivers for the best gaming performance. You can either download dedicated Navidia app, AMD softwareOr Intel graphics software The hub, which will streamline the installation process.
Alternatively, you can manually search your graphics card drivers from their respective websites: Navidia driver, AMD driverAnd Intel driver,
6. Test your advanced graphics card
(Image: © cdprojekt red)
Now for the fun part. Boots one of your favorite games on steam, epic games, ubisoft connect, or Gogge Galaxy’s choice. Many of the best PC games include an underlying benchmarking tool from the graphics menu, which can accurately improve your average FPS. If you are looking to collide from 1080p to 1440p, or 4K, you may want to enable the choice of DLSS/FSR and frame generation for the highest amount of performance.
final thoughts
Upgrade the graphics card to your gaming PC is one of the more straight (yet important) things that you can get to get a better gaming experience. While some GPUs have separate power requirements (and may require an adapter), the process of swapping them (usually) is the same and has a very long. Just beware of any future upgrade, which you have got one of the best PSUs, because (traditionally) thermal design power is increasing the power population, and cannot be worked in your GPU as a result of lack of adequate watt capacity.
