Key takeaways of zdnet
- Unplug 100%, keep the battery between 20%and 80%.
- Avoid drain to 0%; Store unused tablet at 50%.
- Use certified chargers to prevent stress and overheating.
As someone uses daily tablets, I am constantly looking for ways to make my battery longer. However, some habits you don’t think twice can actually hurt your battery over time. The battery of your tablet is ways to increase life, and there are some things that you should do to the contrary.
Also: These 7 common household items were evacuating electricity throughout the day – until I pulled the plug
Most tablets use six to eight hours on the same charge, although the battery is reduced with life age and continuous use. While there are many things that you can do to preserve battery life, here are those you should avoid to ensure the longevity of your battery.
1. Plug your tablet overnight
This is not always a problem with new tablets, but most tablets in the market will suffer from being left overnight. Tablets usually charge up to 100% and stop using electricity. However, by plugging your tablet, it can continue trickle-charging to keep the battery filled, which can stress the battery over time and reduce its lifespan.
Instead, when its battery reaches 100%, unplug your tablet. As a rule of thumb, it is best to charge your battery between 20% and 80%.
Also: Why do I suggest this Samsung Tablet on a prisier model – especially ultra
Like all normal charging mistakes, we do it with our pills, plugging it once or twice an overnight and will not harm it permanently. Battery damage occurs when these wrong practices become a habit and are often followed.
2. Let the battery go up to 0% (and forget it)
I am blaming my tablet’s battery drain to only 0%, forgetting it to set it aside and charge it for a few days. Repeatedly lets its battery to go up to 0%, which is very rapid age, risking the battery death, requiring a replacement or repair to revive it.
I unfortunately learned this difficult way after leaving my discharged nintendo switch light in a drawer for a few months, only to know that its battery was irreplaceable.
Lithium-ion batteries are not just to stay empty, so most tablets do not actually hit 0% when they are closed. Instead, they are closed with a little charge for battery safety, which is why a low-star screen appears when you try to turn them on. If you leave your tablet with a dry battery for days, weeks, or months, the battery slowly discharges until the voltage does not fall very low, damage the internal chemistry of the battery.
Also: 8 reasons I replaced my kindle with an ipad mini to read e -books.
Repeatedly doing so is a battery that is less capable of holding a charge or is unable to recharge worse, worse.
To prevent this and to prolong the life of your battery, avoid leaving the battery below 20%. If you will not use your tablet for some time, charge it up to 50% capacity and close it before storing it.
3. Use incorrect charger
Your local dollar store can be a good place to get party and craft supply, but not electronics. No matter how enchanting the idea of buying a $ 1 charger seems to be the best to avoid it. Using a cheap, non-functioned, or incorrect charger for your tablet can provide inconsistent power, overcharge it, or result in disable charging. All these results are under growing stress on your battery and a small lifetime.
Using the wrong charger on your battery can exceed its charging time. If the watt capacity of a charger does not match the battery properly, it can overheat your device as it struggles to supply enough power, or even to overload the circuit of the tablet if it cannot regulate the power draw. Cheap charger can also distribute the ups and downs voltage, which emphasizes the battery and wears its chemistry.
Also: This wall-mounted smart calendar is a game changer in my house (and it’s $ 50 off)
Many certified chargers, such as Apple-certified or USB-PD, have built-in security measures that skip off-brands and cheap chargers. These measures prevent surge and overheating that can damage battery and charging ports.
While charging your tablet, it is best to find a charger that is either certified or matches properly for your device, from cable to brick.
Trickle charging occurs when your smartphone or tablet is fully charged, but receives small amounts of electricity to keep your battery on 100%. If you plug into your tablet each night and it reaches 100%, its battery will lose a little charge during the night, which triggers the charger to kick it back to up.
Keeping lithium-ion batteries charged at 100% for a long time can cause stress to them and can accelerate the wear, especially if it becomes hot.
Also: Why will you not charge your USB -C device – and what can you do instead
This is why many smartphone manufacturers have a slow charging feature pair when a device is plugged overnight. Instead of charging your battery up to 100% quickly and then rather than topping it for the rest of the night, your smartphone or tablet may take a few hours to reach about 100% in the morning. This expands the battery lifetime of the device.
Show more
Chemical aging is a term used for general wear and tears that occur in lithium-ion batteries as it repeatedly passes through charging and discharging bicycle. Over time, the chemical reactions inside the lithium-ion battery used in smartphones and tablets become less efficient, resulting in reduced capacity and the risk of slow performance is called chemical aging.
Also: Best Android Tablet of 2025: Expert Testing and Review
There is no way to avoid chemical aging; This is simply the age of lithium-ion battery, but you can slow down it. Chemical aging is mentioned above, such as plugged into your device overnight, leaving the battery often up to 0%, using cheap charger, and exposing to heating the device.
Show more
Be ahead of the latest technical tips with Tech todayReacted every morning to his inbox.
