Cell phone signal booster Perhaps there is something that you have never thought of unless you leave the phone call unexpectedly. Think that when you are on an important phone call, or even when you are interacting with a friend or family member, and out of blue, your call is dropped.
You check your phone, and it says that you have three out of four times. So, what happened to the cat? Well, it turns out that those cell phones are not the best indicators of the strength and quality of the cell phone signal, and your home may require a cell phone signal booster, such as Surcol Flair 3.0.
Even though many companies have called for a return to the office, more people still work compared to the pre -home time. Above 20% of employees still work from homeAnd this means that a reliable cell phone signal in the house is more important than ever. A cell phone signal booster can help, well, promote the strength of that cell phone signal to help eliminate the disappointment that falls with fallen calls, slow data speeds and poor cell signals.
When I received Surecall Flare 3.0 cell phone signal booster, I wondered how much it would be at my house, because I usually have usually 3 out of 4 times. It was not until I used the Field Test menu on my iPhone, (later more on it) that I came to know that the strength and quality of my cell phone signal was not as good as I had once thought.
With this new knowledge, it turned to me to Surecall Flare 3.0 and whether this cell phone signal booster can improve the cell phone signal in my house.
Surecall flare 3.0 review: specification
| Row 0 – SAIL 0 | Row 0 – Cell 1 |
|
Aplink frequency range (MHz) |
698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G. Block included) |
|
Downlink frequency range (MHz) |
728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G. Block included) |
|
Maximum profit |
72 dB |
|
Cable |
RG -6 (50 feet) |
|
weight |
1.81 pounds |
|
Dimensions |
5.125 × 7.25 × 5.625 inch |
Surecall flare 3.0 review: setup and installation
In the box you will find both the inner receiver and the exterior antenna, two u-huk/clamp, which to stick the outside antenna to a pole at your home (this is what I did), and even a growing bracket if you want to mount the antenna on the edge of your home or garage. You will also get a 50 -foot cox cable.
For installation, first of all, you need to plug into indoor antenna and download Surecall app (from QR code in instructions). This will help both of you indicate the exterior antenna in the right direction towards the nearest cell tower, and the indoor will get proper separation between the receiver and the outer antenna. Without it, it can make it called oscillation, and without receiving very technical, it essentially prevents the receiver from doing the best work as it can be.
For outdoor antenna, I followed the directions and took it to my home to the highest vision line. From there, I used the app to indicate the antenna where the signal was best (towards the nearest cell tower).
Now, here is rubbing: Yes, you want the best sign possible. But when I went back in, the receiver was showing a red light indicator to the left. When I checked the manual, it meant that the sign was Very strong. What? Obviously, a sign that is very strong, disrupts some cellular bands. Therefore, I went back to the roof, and adjusting the antenna until the receiver inside was satisfied.
To make me sure that I had good isolation, I had to move a little bit to the receiver. The app will also help you guide you in doing so. What is good about installation that once the receiver is plugged inside, and the receiver from the outside is installed with a cable running from outside to inside, installation. There is no indication that you need to follow on the app, or to take special steps. Just plug it and it is originally ready.
However, I have a grip with cox cable. For one, it is really fat. For testing, I drove the cable in front of my house and through my front door. I originally could not close the door in all ways due to the thickness of the cable. I would recommend buying Amazon or Best and ordering a flat cox cable to make it easier to slide under a door or through a window.
Surecall Flare 3.0 Review: Performance
Before I get into the actual performance, I want to use the metrics I am using to measure the performance. The power of the cell signal is measured in a metric that is measured for reference signals, or (RSRP) lower. There is another metric, reference signal obtained quality, or (RSRQ), which measures the quality of the signal.
A quick and dirty rupture of measurement and what they mean:
- RSRP – Less (more negative) numbers mean weak signals.
- Good limit:
- Excellent: of -80 dBM
- Good: -80 to -90 dBM
- Appropriate: -90 to -100 DBM
- Poor: <-100 dbm
- Good limit:
- RSRQ – High (low negative) numbers are better.
- Good limit:
- Excellent: A -10 DB
- Good: -10 to -15 dB
- Poor: <-15 dB
- Good limit:
Now when you have a better understanding of technical goods, dive into the performance. There is one “Field test menu“You can get on your iPhone to test the strength of the cell phone signal.
Using this, I took several measurements throughout the day (they turn every few seconds because it constantly updates the reading) and took the strength of the average signal before and after using the signal booster.
Before the signal booster was installed, in my entire house, the average measured RSRP was -102 DBM for 5G, which is apparently bad. After the cell phone booster became active, my average measurement was -92 DBM, which upgrades it to the fair category.
When it came to LTE, before the booster, I was watching an average -101 DBM. After the booster was installed, I was watching an average -95.6 DBM, which is about 6 DBM improvement.
Interestingly enough, although I saw an increase in RSRP, RSRQ remained relatively identical. The average -11 DB (to be 11.66666667 to be accurate) for both before and after the RSRQ).
Of course, it is nowhere to the maximum profit listed on the manufacturer’s website, but it is fine. There is a innumerable factors that contribute to promoting those signals.
Overall, I was surprised that the cell phone signal was clearly so bad in my house, and pleased that the cell phone booster worked to improve and provide more reliable and stable signs.
Surecall Flare 3.0 Review: Price
Surecall Flare 3.0 Retail for $ 379.99 from the manufacturer’s website. You can also find it Amazon for the same price,
Finally, for me, that promotion from poor to fair does not make it cheaper. But I see the appeal. Many people in my house work from home, which means Wi-Fi can be at a premium, and sometimes, may be incredible for Wi-Fi calls. A strong cell phone signal frees Wi-Fi and serves as a priority for your phone calls, text, etc.
If you live in a so-called cell phone “Dead-Zone”, I also see the appeal. Especially if you receive close to the maximum amount provided by the manufacturer (72 DBM) – which is probably a highly inflated number – but still, in that scenario, I can also see that it is worth it.
Surecall Flare 3.0 Review: Decision
In addition to some manual labor of being on my roof (you don’t have to do so), and the receiver had little troubleshooting, easy to get to get the right signal strength, was easy. It is similar to a TV antenna – screw it into your cox jack behind TV and Bam, free cable.
It feels almost the same way – connect the cox cable, turn it on, and you are good to go. I recommend withdrawing a little extra money to get a flat cable instead of the group provided. As long as you want to do some drilling and patching through the walls, a flat cable will make a miracle for you without infiltration through windows or doors to the cable inside your house.
I experienced an average of 10 dBM improvement for signal strength and did not make any real changes in quality with practically the use of day-to-day. For me, this is not enough difference to open cash for a cell phone signal booster, but it is not to say that it can be a smart step for you, which depends on your living position and cell tower coverage in your area.
